One of the most important stages of the construction on new energy block 1075 MW in Kozienice power plant went according to plans. Conducted successful tests of water boiler Enea is already certified as ready for energy production.
Trial took place under the supervision of a unit of his choice from the Polish Office of Technical Inspection, which issued the corresponding certificate.
When you try to a boiler, which the Assembly ended in early March, and the entire installation was filled with water. Then gradually the water pressure has been raised to 514b. Thanks to the tightness of the examined sample boiler pressure system it is reported that there are no issues.
The entire installation of the boiler is also the thousands of pieces of pipe and welds. Thanks to the pressure tests we checked correctness of the assembly for all those elements, said Piotr Szmaj, Director of the building block in the manufacture (ENEI).
EneI has announced that end indicated above the boiler construction enables the opening of the next block in the Kozienice power plant Assembly work fronts. A contract with a consortium of Hitachi Power Europe (now Hitachi Mitsubishi Power Systems Europe) and Polimeks-Mostostal building block in Kozienicach.
The Consortium declared at block efficiency 45.59%, power NET-58 MW 1075 monthly duration. Polimeks range provides for the construction and assembly work, whose share of the worth of 1.5b euro contract is ready in 43%.
New coal burning block in Kozienicach will increase about 1/3 of the production capacity of the plant. In total, the construction of a block is to be involved. 2500 people, and a further 200 people will be employed to support the running of the block.